User Tools

Site Tools


how_to_install_phpsysinfo_on_vortexbox_2.3

This is an old revision of the document!


How to install the System Information page on VortexBox 2.3

The System Information page provides useful information about the VortexBox system configuration and status. It has been a useful feature in past releases of VortexBox. However, it is not yet available in the official VortexBox 2.3 release.

Here's how to install the system infomation page (phpsysinfo) on VB 2.3. These notes show how to install the package. You can also add an icon for phpsysinfo to the VB GUI home page; see the last section for details.

Note: if you have a VortexBox Appliance that uses the OEM repository instead of the Fedora repositories, these instructions won't work. You will have to switch from using the OEM repo to the Fedora repos. See http://vortexbox.org/forum/vortexbox/help/59630-hddtemp-in-sysinfo-not-quite-working?p=59642#post59642 for more info.

1. Login to your VortexBox; see Login.

If this is the first time you are installing the System Information page on VB 2.3, continue with step 2. If you are upgrading to a newer version from a previous install, skip to step 5.

2. Install the hddtemp and lm_sensors packages:

yum install hddtemp lm_sensors

3. Enable and start the hddtemp daemon, which monitors hard drive temperatures:

systemctl enable hddtemp systemctl start hddtemp

4. Detect sensors:

sensors-detect

Accept the default (hit Enter) for each question (there are many!)

5. Download and install the latest phpsysinfo package (3.2.5 as of February 2016). See http://phpsysinfo.github.io/phpsysinfo/ to check for a newer version. If you are using a newer version, use that version number in place of 3.2.5 in the following instructions. Note: the line numbers in step 6 may be slightly different if you are using a version other than 3.2.5.

wget https://github.com/phpsysinfo/phpsysinfo/archive/v3.2.5.zip unzip -d /var/www/html v3.2.5.zip cd /var/www/html rm -f phpsysinfo ln -s phpsysinfo-3.2.5 phpsysinfo

6. Set up and edit phpsysinfo config file:

cd phpsysinfo cp phpsysinfo.ini.new phpsysinfo.ini nano phpsysinfo.ini

Note: use ESC-g to go to a specific line number in nano.

Change line 203 from

SENSOR_PROGRAM=false

to

SENSOR_PROGRAM=“LMSensors,HDDTemp”

If you want Fahrenheit instead of Celsius temperature units, change line 172 from

TEMP_FORMAT=“c”

to

TEMP_FORMAT=“f”

Write the file (control-o) and quit (control-x).

7. In your browser, go to the VB GUI phpsysinfo page: http://vortexbox/phpsysinfo or http:<vortexbox-ip>/phpsysinfo; e.g. http://192.168.1.150/phpsysinfo on my VBA. Hopefully, you will see the System Information page. You can change the appearance of the page by selecting a template from the menu at the top of the page. There are 9 templates to choose from: aqua, clean, cream, idash, jstyle_blue, jstyle_green, nextgen, phpsysinfo, and two. Try different templates and pick one you like. phpsysinfo is the default, but I like aqua better. Here's what the 3.1.12 System Information page looks like on my VB 2.3 VBA with the aqua template. Note that it shows the Distro Name as “VortexBox 2.3”, whereas 3.1.11 showed the Distro Name as “Fedora release 20 (Heisenbug)”. 8. If you are happy with the display, and you have an older version of phpsysinfo (3.1.17) installed, you can remove the older version by rm -rf /var/www/html/phpsysinfo-3.1.17 Use the correct directory name for the previous version installed on your VB if it's not phpsysinfo-3.1.17. 9. You can also delete the zip file: cd rm -f v3.2.5.zip How to add an icon for phpsysinfo to the VB GUI If you would like an icon for pypsysinfo on the VB GUI home page, you can edit the VB GUI code. Note that changes to iconlist.php will be overwritten when the vb-GUI package is updated. 1. Download the phpsysinfo icon: cd /var/www/html/images wget https://pbs.twimg.com/profile_images/1764401647/psi_logo.png The icon: 2. Edit /var/www/html/libs/iconlist.php: cd /var/www/html/libs cp iconlist.php iconlist.php.official nano iconlist.php Add the following lines after line 34: if (file_exists('/var/www/html/phpsysinfo/phpsysinfo.ini')) { $icon_array[] = array('location' ⇒ $loacation_count += 80, 'name' ⇒ 'System Information', 'icon' ⇒ 'psi_logo.png', 'link' ⇒ 'http:'.$ipaddress.'/phpsysinfo', 'newtab' ⇒ '1');

      $loacation_count += 10;

}

Write the file (control-o) and exit (control-x).

3. Save your changes so they can be restored after the vb-GUI package is updated:

cp iconlist.php iconlist.php.mine

4. After a vb-GUI update, check to see if there were any other changes to iconlist.php:

cd /var/www/html/libs diff iconlist.php iconlist.php.mine

If there are no changes to iconlist.php other that the ones you made, you can replace iconlist.php with your version by

cp iconlist.php.mine iconlist.php

If there are other changes to iconlist.php, you'll have to redo step 2 on the new version of iconlist.php.

5. In a browser, go to the VB GUI web page http:<vortexbox-ip>. You should see the phpsysinfo icon with the label “System Information”. Click the icon. A new tab should open with the phpsysinfo page.

how_to_install_phpsysinfo_on_vortexbox_2.3.1455317098.txt.gz · Last modified: 2016/02/12 17:44 by ron